China Titanium silicon carbide Ti3SiC2 MAX phase ceramic material Manufacturers, Suppliers, Factory

Our research at SAT NANO has identified several critical advantages. First, Boride Nanoparticle additives create a denser, more cohesive barrier against moisture and chemical penetration. Second, they dramatically improve abrasion resistance – often increasing it by 200-300% compared to standard coatings. Third, they maintain stability at temperatures exceeding 800°C, where traditional coatings would rapidly degrade.

Are you familiar with nanoscale nickel oxide powder? If you're not, then you're missing out on the wonders that this tiny but mighty powder can provide. Nanoscale nickel oxide powder is a highly sought-after material due to its unique properties and wide-ranging applications.

The powders suitable for use as lubricants can vary depending on specific applications and requirements. The following are some common powder types suitable for use as lubricants:

The crystal structure of nano iron oxide is hexagonal, and the lattice parameters change with the decrease of particle size. When the particle size is large (usually larger than tens of nanometers), iron oxide exhibits a typical α- The Fe2O3 structure, also known as hematite structure, is red in color. This is because typical α- The Fe2O3 structure has a high reflectivity for visible light, absorbing shorter wavelengths (blue-green) in visible light, leaving only longer red wavelengths observed.

Silver coated copper technology is a composite metal material technology, and its core product silver coated copper powder is composed of copper in the core and silver shell covering its surface. A typical silver layer thickness is between 50-200 nanometers, with a silver content (mass ratio) of 5% -30%. In this structure, the copper core plays a role in providing low cost and high conductivity, while the silver shell is crucial in ensuring that the particles resist oxidation during processes such as pulping and printing, while forming good ohmic contact with the battery silicon wafer or TCO film. After sintering, the silver shell acts as a conductive medium, ensuring low contact resistance and reliable adhesion of the electrode, while the copper core reduces material costs while endowing the slurry with certain mechanical strength and thermal stability.