China Mn2O3 nanopowder Manufacturers, Suppliers, Factory

The synthesis of carbon quantum dots can be mainly divided into two categories: top-down method and bottom-up method. Through the pre-treatment, preparation, and subsequent processing, carbon quantum dots can be controlled in size, passivated on the surface, doped with heteroatoms, and nanocomposites to meet the requirements.

Silver coated copper technology is a composite metal material technology, and its core product silver coated copper powder is composed of copper in the core and silver shell covering its surface. A typical silver layer thickness is between 50-200 nanometers, with a silver content (mass ratio) of 5% -30%. In this structure, the copper core plays a role in providing low cost and high conductivity, while the silver shell is crucial in ensuring that the particles resist oxidation during processes such as pulping and printing, while forming good ohmic contact with the battery silicon wafer or TCO film. After sintering, the silver shell acts as a conductive medium, ensuring low contact resistance and reliable adhesion of the electrode, while the copper core reduces material costs while endowing the slurry with certain mechanical strength and thermal stability.

We would like to inform you that our office will be closed from May 1st to May 5th in observance of the 2024 Labor Day holiday. We would like to express our gratitude for your continuous support to our company.

As one of the most important characterization parameters of nano powder, particle size directly affects the physical and chemical properties of the powder, and then affects the performance of the final product. Therefore, its detection technology is an important tool for industrial production and quality management, and plays an irreplaceable role in improving product quality, reducing production costs, and ensuring product safety and effectiveness. This article will start from the principle and compare three common methods for powder particle size detection: electron microscopy, laser particle size analysis, and X-ray diffraction line width method, and analyze the advantages, disadvantages, and applicability of different particle size testing methods.

Copper is different from metals such as aluminum and nickel in that it is difficult to form a dense and stable intrinsic passivation layer on its surface. Therefore, the exposed copper surface will be continuously oxidized and corroded by oxygen and water vapor in the air. The smaller the particle size and larger the specific surface area of copper powder, the easier it is to rapidly oxidize to produce products such as cuprous oxide (Cu2O) and copper oxide (CuO). This oxide insulation layer significantly reduces the conductivity of copper powder and hinders particle sintering connection, resulting in degradation of the performance of the conductive paste.

Since ancient times, silver has been widely used for wound treatment and water purification due to its natural antibacterial properties. After entering the nano era, silver nano powder (particle size is usually between 1~100 nm) can release higher concentration of active silver ions (Ag+) due to its extremely high specific surface area, showing far more biological activity than macro silver materials. At present, nanosilver has moved from laboratory research to clinical applications, becoming an important supplement to modern anti infective medical systems.